Framing Lumber for a 30 ft Wall — 24" OC, 8 ft Studs
A 30-foot non-load-bearing wall framed at 24 inches on center with 8-foot studs needs about 16 members.
How to use this tool
- Enter the total wall or floor span in feet.
- Set the on-center spacing (16 in or 24 in are most common).
- Enter the individual member length in feet.
- The result shows the number of members and total board linear footage to purchase.
Find the stud count for an interior wall or partition framed at the wider 24-inch spacing.
Frequently asked questions
- How many studs do I need for a wall?
- Divide the wall length by the stud spacing (in feet) and add 1 for the end stud. Add 10% for waste, corners, and headers. For a 20 ft wall at 16 in OC: (20 ÷ 1.33) + 1 = 16 studs, plus 10% waste = 18 studs.
- What is 16-inch OC spacing?
- OC stands for on-center — the distance from the center of one stud to the center of the next. 16-inch OC is the standard for exterior walls and load-bearing walls; 24-inch OC is used in non-load-bearing walls to save lumber.